BOTTOM WELD BAGS

We can manufacture plastic bottom weld bags in the following range:

BOTTOM WELD BAGS WIDTH:

• Minimum Bag Width 2” (50mm) Maximum Bag Width 52” (1320mm)

BOTTOM WELD BAGS LENGTH:

• Minimum Bag Length 3.5” (90mm) then 6” once bag width increases above 24” wide Maximum Bag Length 80” (2030mm) then increasing to 105” as bag width increases up to 52” wide

BOTTOM WELD BAGS THICKNESS:

• Minimum Film Thickness 80 gauge (20micron)
• Maximum Film Thickness 1000 gauge (250micron) [Note 500gauge only if side gusset bag required]

BOTTOM WELD BAGS PERFORATING:

• Most combinations of Perforations plus print register work are fine, plus bottom weld carrier punch handles.